Home Home Products Products Distributors Distributors Contact Contact Manuals/support Manuals/support
Triton  Off road engines
Copyright Triton RC LLC 2011 - 2021 Content may not be used without express written consent
Low cost international shipping
Triton L3 EVO Low profile .21 engine The Triton L3  EVO .21 off road engine uses a 3 port design to provide powerful bottom end ,xlnt top end speed and great fuel economy! This is a very fast  competitive racing engine and is great for both for buggy and truggy applications.  The  EVO engines are equipped with a  Swiss ceramic rear bearing which is the highest qualty RC engine bearing available. The EVO untilizes an upgraded crankshaft with silicone ramp and mirror finish to increase air flow and preformance as well as a revised crankcase to optimize air fuel delivery. The EVO engines have a new low profile and low CG design making it 6-10 mm lower than other engines wich makes for better handling and the high efficiency colling head provides cooler temps than those “ odd” shaped heads which look cool but simply arent as efficient at keeping engine temp under control. We use  a billet lightweight piston and rod design which allows us to get the best possible balance of the piston, rod and crankchaft assembly. The Triton carburetors are the most user friendly carburetors in the industry and provides a rock solid idle and easy stable tuning. Triton glow plugs recommended (not included). Features Big power for buggy or truggy High quality swiss Ceramic rear bearing Insulated base short needle carburetor  Ultra strong lightweight connecting rod 7mm carburetor venturi Low profile drilled lightweight cooling head Machined front case for flywheel clearance Easy and stable tuning carburetor Optimzed mirror finish crank with silicone ramp Crankcase optimized for better performance
Specifications: Engine size: 3.49cc Bore X Stroke: 16.2 1X 16.89 HP: 2.6 RPM: 40,500 Triton engines are made in Italy and designed in the USA by Lance Heidmann with proprietary Specs not found in any other engine brand. Each Triton engine is hand matched and checked for the best possible quality and fit using only parts that pass strict tolerance standards. Triton engines are manufactured using only the highest quality materials and offer industry leading fuel economy, ease of tuning, reliability and performance. Our goal was to make the best quality and performing engines on the market and still make them affordabel for racers. If you are looking for a top of the line engine look no further Triton is here!
Triton L5 EVO Low profile .21 engine The Triton L5  EVO .21 off road engine uses a 5 port design to provide powerful bottom end  insane top end speed and great fuel economy! This is a very fast  competitive racing engine and is great for both for buggy and truggy applications.  The  EVO engines are equipped with a  Swiss ceramic rear bearing which is the highest qualty RC engine bearing available. The EVO untilizes an upgraded crankshaft with silicone ramp and mirror finish to increase air flow and preformance as well as a revised crankcase to optimize air fuel delivery. The EVO engines have a new low profile and low CG design making it 6-10 mm lower than other engines wich makes for better handling and the high efficiency colling head provides cooler temps than those “ odd” shaped heads which look cool but simply arent as efficient at keeping engine temp under control. We use  a billet lightweight piston and rod design which allows us to get the best possible balance of the piston, rod and crankchaft assembly. The Triton carburetors are the most user friendly carburetors in the industry and provides a rock solid idle and easy stable tuning. Triton glow plugs recommended (not included). Features Big power for buggy or truggy High quality swiss Ceramic rear bearing Insulated base short needle carburetor  Ultra strong lightweight connecting rod 7mm carburetor venturi Low profile drilled lightweight cooling head Machined front case for flywheel clearance Easy and stable tuning carburetor Optimzed mirror finish crank with silicone ramp Crankcase optimized for better performance
Specifications: Engine size: 3.49cc Bore X Stroke: 16.2 1X 16.89 HP: 2.6 RPM: 42,000 Triton engines are made in Italy and designed in the USA by Lance Heidmann with proprietary Specs not found in any other engine brand. Each Triton engine is hand matched and checked for the best possible quality and fit using only parts that pass strict tolerance standards. Triton engines are manufactured using only the highest quality materials and offer industry leading fuel economy, ease of tuning, reliability and performance. Our goal was to make the best quality and performing engines on the market and still make them affordabel for racers. If you are looking for a top of the line engine look no further Triton is here!
$ 349.99
$ 349.99